Nokia 7750 cli commands. Entering a classic CLI engine command preceded by the “//” command executes the command in the classic CLI engine and returns immediately to the MD-CLI engine. The most specific value is used. CLI commands are entered at the command line prompt. This section provides a brief overview of the tasks that must be performed to configure BGP and provides the CLI commands. These are: In-band Ports (access ports on MDAs) Console Port (DB-9 Serial Port) CPM Ethernet Port (Management Port) By the way, for the serial connection the default setting are like below: Baud The following commands apply to the 7750 SR-c12 model. No argument displays all the EVC on the service router. For sample Python scripts, visit the Nokia pySROS GitHub repository. The debug commands in the MD-CLI are available in an exclusive, private, or read-only session using the explicit or implicit configuration mode. All BGP instances must be explicitly created on each 7705 SAR. config — system — sync-if-timing — abort — begin — commit — ref-order first second [third] — no Use the CLI to access, configure, and manage Nokia 7210 SAS devices. configure — router string — aggregates — aggregate (ipv4-prefix | ipv6-prefix) — aggregator — address string — as-number number — apply-groups reference — apply-groups-exclude reference — as-set boolean — blackhole — generate-icmp boolean — community string — description string — discard-component-communities boolean — indirect (ipv4-address So, how can we access CLI of Nokia 7750 SR and Nokia 7450 ESS devices. The compare command in the MD-CLI compares configurations and displays the difference in one output. After the SRGB is changed, the user must re-enter the prefix-sid-range command. The info command always displays all keys of the list on the same line. The CLI can be used for configuration and management of routers. Saving a configuration Configuration changes are lost if the system is powered down or the router is rebooted before the changes are saved. Many of the hierarchical BGP commands can be used at different levels. The 32-bit unsigned sum of the link-state database advertisements LS checksums contained in this area’s link state database. 6. When a save command is executed, the file xyz. Aliases created in the system-wide MD-CLI environment context configure system management-interface cli md-cli environment command-alias are copied into the local environment context when a new CLI session begins. For more information about MD-CLI and the commands used to configure the BNG CUPS UPF, refer to the 7450 ESS, 7750 SR, and 7950 XRS MD-CLI User Guide. exit — Enables the user to execute the exit command. For example, 3. The timer defaults to 600 seconds and must be at least 2x the refresh-time (otherwise the CLI command is not accepted). For IES and VPRN IP interfaces (VPRN is supported on the 7750 SR only), lease-populate enables DHCP snooping for the subnets defined under the IP interface. Use the admin > save file-url command to save the current configuration. The following sample configuration shows how to configure a Python script get_all_interfaces. CLI Structure. A neighbor-specific command takes precedence over a global BGP or group-specific command. An interface includes state information that was obtained from underlying lower-level protocols and from the routing protocol itself. Configuring an Interface. The RMON-MIB log table entries can be viewed using the show>system>thresholds CLI command. From the MD-CLI tree, the configure log accounting-policy command shows that the key for the command is a number: Use the CLI to access, configure, and manage Alcatel-Lucent’s SR OS routers. For more information about monitor commands, refer to the Basic System Configuration Guide for command usage and CLI syntax. Italicized names after a command or parameter name indicate the parameter type. System Administration Commands in the MD-CLI. This command does not prevent the agent from sending SNMP notifications to any configured SNMP trap destinations. The info command displays context-level information. When telnet-reply is not enabled, Telnet requests to non-owner master virtual IP addresses are silently discarded. The following CLI commands are displayed to illustrate the key authentication features. It is assumed that the network administrators have an understanding of networking principles and configurations. Non-owner backup virtual routers never respond to Telnet requests regardless of the telnet-reply setting. The periodic-loopback command can only be enabled when the config>system>atm>oam context is enabled. The pwc command provides a user who is in the process of dynamically configuring a chassis a way to display the current or previous working context of the CLI session. Technical reference Documents under this category provide information about supported attributes, AVPs, APIs, and use of the Network Interface Shell on routers. show — router If no command line options are specified, all ARP entries are Oct 31, 2023 · This guide provides information about the Model-Driven Command Line Interface (MD-CLI). Jun 21, 2018 · When we see the commands to be applied using “compare” functions, the commands are already in correct order. Access to specific CLI commands is controlled by the permissions set by your system administrator. Oct 31, 2023 · The MD-CLI provides the ability to execute a Python application directly from the command line. By default, the CLI command prompt indicates the device being accessed and the current CLI context. The following example is from a 7750 SR: A:ALA-1>config>router>bgp>group# pwc Use the CLI to access, configure, and manage Nokia’s routers. For 7750 SR-c12/c4 systems, after removing MDA configurations, you can shutdown and remove the MCM from service before modifying the card. candidate - edit [exclusive] - commit [confirmed timeout] [comment comment] - commit no-checkpoint [confirmed timeout] - confirm - copy [line MD-CLI Command Reference Guide (for 7450 ESS, 7750 SR, and 7950 XRS) This guide describes all MD-CLI commands and their supported values and parameters. Using the MD-CLI. 12. The update check command performs a dry-run update of the candidate configuration. The exit all command leaves the file system/file operation context and returns to the <ROOT> CLI context. Documents under this category provide information about the Model-Driven Command Line Interface and security for operating and maintaining the device running the SR OS. cfg. password — Enables the user to execute the Provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI User Guide: Provides information about how to use the MD-CLI Documents under this category include information about the attributes, APIs, and the full set of CLI commands (MD-CLI and classic) supported by SR OS. router commands. collector [ip-address] (ipv4-address-no-zone | ipv6-address-no-zone) port number. Nokia’s Operating System (OS) CLI is a command-driven interface accessible through the console, Telnet and secure shell (SSH). The detail option displays all default values. This command is available with the merge option of the load command. Alarm support is intended to cover a focused subset of router states that are likely to indicate service impacts (or imminent service impacts) related to the overall state of hardware assemblies (cards, fans, links, and so on). See the 7450 ESS, 7750 SR, and 7950 XRS Basic System Configuration Guide. Entering the file command returns the cursor to the working directory where the exit command was issued. Range: 32 | 64 Introduced: 21. the implementation flow, as well as Command Line Interface (CLI) syntax and command usage. This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR. The CLI environment commands are listed in Table 4. See MD-CLI command descriptions for more information. 7450 ESS, 7750 SR, 7750 SR-a, 7750 SR-e, 7750 SR-s, 7950 XRS The config-backup command allows you to specify the maximum number of backup versions of configuration and index files kept in the primary location. suppressed — Displays damping entries suppressed because of route damping. For the location command, keyword must be one of the keywords cf1, cf2, or cf3. So there is no problem, when we issue commit. This guide also provides a reference chapter with the classic CLI commands that can be used to configure the BNG CUPS UPF. Candidate Commands. MD-CLI REs only support Extended Regular Expression (ERE) notation as defined in section 9. Oct 31, 2023 · This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR. The SRGB range change fails if an already allocated SID index or label goes out of range. Any future named pool mode configuration commands or overrides will be placed in the named-pool-mode CLI con-text. CLI commands that are used to manage the SR OS in either the classic or the MD-CLI mode. See Common CLI Command Descriptions for command syntax. history — Displays damping entries that are withdrawn but have history. When switching engines is authorized, all classic CLI engine commands can be executed from the MD-CLI engine. That is, a BGP group-specific command takes precedence over a global BGP command. Specifies matching SAPs with the specified IP interface. The CLI Command Prompt. 0. The number of allowed simultaneous DHCP sessions on a SAP or interface can be limited using the lease-populate command with the parameter number-of-entries specified. Enable the MD-CLI and model-driven mode, using these commands in this order: — configure system management-interface cli md-cli auto-config-save — configure system management-interface configuration-mode model-driven This command displays Ethernet Virtual Connections (EVC). The following examples show the admin show configuration output of the running configuration in the default configuration region ( configure ). Use one of the following CLI commands to display the current configuration. 2. Use the following CLI syntax to delete a card provisioned for a specific slot: This command configures the route target (RT) component that will be signaled in the related MP- BGP attribute to be used for BGP auto-discovery, BGP VPLS, BGP Multi-Homing and EVPN if these features are configured in this VPLS service. For more information, see PFCP service SAP and Changes are lost unless the configuration is saved. If an IP address or interface name is specified, then only data regarding the specified interface is displayed. This command displays facility alarms on the system. The index option displays only the persistent indexes. The following example is from a 7750 SR: Proper login and CLI command authentication is still enforced. trap — A TiMOS logger event is generated. Configure only the ingress router and configure LSPs to allow the software to make the forwarding decisions or statically configure some or all routers in the path. For more information about the supported MD-CLI commands, refer to the 7450 ESS, 7750 SR, and 7950 XRS MD-CLI Command Reference Guide. . The same configuration management commands that are available in the configure region are available in the debug region. All the implementation flow, as well as Command Line Interface (CLI) syntax and command usage. This guide does not cover any other classic or MD-CLI commands. In the prompt, the separator used Mar 15, 2024 · This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR. 50. ip-address. The pwc command displays a list of the CLI nodes that hierarchically define the current context of the CLI instance of the user. The pyexec command takes as an option, either the name of a Python application from the SR OS configuration (configure python python-script application_name) or the URL to the location (local/remote) of a Python application. Description The named-pool-mode CLI context is used to store the MDA and port level named pool mode configuration commands. Switching to classic CLI. All references to the term ‘CLI’ in the SR OS user documentation are generally referring to the classic CLI. Successful/Failed — The results from the execution of the CLI script file specified in the Cfg-OK Script location. Introduced: 22. In order to enable BGP, one AS must be configured and at least one group must be configured which includes neighbor (system or IP address) and peering information (AS number). Use the following administrative commands to perform management tasks. See Configuring an Entry for the CLI syntax. When the service is configured, the IP address must be in the range specified as a service prefix. This guide is organized into functional sections and provides concepts and descriptions of the MD-CLI environment, the configuration workflow, and the syntax and command usage within the MD-CLI. Documents under this category provide the full set of CLI commands (MD-CLI and classic) supported by SR OS. [ex:/configure] A:admin@node-2# compare ? The CLI script file can contain commands for environment settings, debug (excluding mirroring settings), and other commands not maintained by the configuration redundancy. Basic CLI Commands — back — clear — echo [text-to-echo] [extra-text-to-echo] [more-text] — This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR. The pwc command provides a user who is in the process of dynamically configuring a chassis a way to display the current or previous working context of the CLI session. The TiMOS logger utility then distributes the notification of this event to its configured log destinations which may be CONSOLE, telnet session, memory log, cflash file, syslog, or SNMP trap destinations logs. Services Documents under this category provide information about service functionality provided by SR-series routers and how to configure and implement various protocols and Show Commands. Executing Classic CLI Commands from the MD-CLI Engine. URL — The location and name of the CLI script file executed following a failed boot-up configuration file execution. In the following examples, location and graceful-shutdown are command names. admin# display-config [detail | index] — info detail These commands show the same configuration about as the info command but are not subject to command authorization and do not require configuration access. CLI Usage 7750 SR OS Basic System Configuration Guide Page 25 CLI Environment Commands The CLI environment commands are found in the root>environment context of the CLI tree and controls session preferences for a single CLI session. Jul 12, 2024 · This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR. The show L2TP commands apply only to the 7750 SR and 7450 ESS. Jul 12, 2024 · One example of an application is a custom CLI command. 7750 SR OS OAM and Diagnostics Guide Page 387 Tools Command Reference Command Hierarchies • Tools Dump Commands on page 387 • Tools Perform Commands on page 390 Configuration Commands Tools Dump Commands tools —Tools Dump Commands — dump — aps aps-id [clear] — aps mc-aps-signaling [clear] — aps mc-aps-ppp [clear] — lag lag-id lag-id These commands show the same configuration as the info command but are not subject to command authorization and do not require configuration access. Use the CLI to access, configure, and manage Nokia’s routers. The following commands are not supported in the switchover-exec file: clear, configure, candidate, oam, tools, oam, ping, traceroute, mstat, mtrace and mrinfo. r1 3he 17153 aaad tqzza 01 See the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Command Reference Guide and the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI User Guide for more information. For the graceful-shutdown command, boolean must be one of the keywords true or false, although explicitly using the keyword true is optional. In OSPF, an interface can be configured to act as a connection between a router and one of its attached networks. May 28, 2012 · exec — Enables the user to execute (exec) the contents of a text file as if they were CLI commands entered at the console. For a description of individual debug commands, see the 7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide. These commands are configured in the config>router context. Even if we have activated MD-CLI and we are in MD-CLI mode, we have possibility to switch to classic CLI view and/or just call commands from that mode. 0/16, but will allow other Join messages. Entering a CLI command makes navigation possible from one command context (or level) to another. Mar 15, 2024 · This command allows the user to enter configuration commands directly in an interactive session. When the hold-time expires, the session is considered to be DOWN and the stale timer is started. interface. See Configuring an Interface and Configuring a Virtual Link . Creating an IP Address Range. Not used — No CLI script file was executed. help — Enables the user to execute the help command. Currently, only the ingress and egress named-pool-policy commands are supported. The update check command must be executed at the configuration root (/configure) or it can be executed in any configure branch descendant as update check /configure. The CLI command tree is a hierarchical inverted tree. Audience This manual is intended for network administrators who are responsible for configuring the 7750 SR-Seriesrouters. PDF. Provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) with those used by Junos OS and IOS XR 7750 SR and VSR Network Interface Shell Configuration and User Guide Use the CLI to access, configure, and manage Nokia’s routers. The policy will not allow Join messages for group 229. The classic CLI is the CLI that has been supported in SR OS from the initial introduction of SR OS. 1-2008, 2016 Edition REs, as defined in chapter 9. MD-CLI REs are based on a subset of The Open Group Base Specifications Issue 7 and IEEE Std 1003. To configure MPLS-signaled label-switched paths (LSPs), an LSP must run from an ingress router to an egress router. For example, the prompt: A:cses-E11>config>router>if# indicates the active context, and the user is on the device with hostname cses-E11 in the config > router > interface context. The port and VLAN arguments display information related to EVC associated with the port and VLAN. MD-CLI Quick Reference Guide This guide provides a comparison of the Nokia SR OS Model-Driven Command Line Interface (MD-CLI) to those used by Junos OS and IOS XR. 208/32 and source 192. Notes 2. Shutting down SNMP does not remove or change configuration parameters other than the administrative state. 1 This section provides information about common Command Line Interface (CLI) syntax and command usage. Note: This command is not supported over non-interactive interfaces (for example, NETCONF). Basic CLI Commands • Environment Commands • Monitor Commands . These command parameters can be defined at the same time interfaces and virtual-links are being configured. Monitor Commands. The document provides information about using the command line interface (CLI) for an Alcatel-Lucent 7750 SR OS router. This command must be configured to 64 when the LAG name is a numeric identifier in the range of 1 to 64. This checksum excludes AS External LSAs (type-5). based on MD-CLI syntax. Merge conflicts are reported the same way as for the update command, but the update is not executed. If no command line options are specified, the user is prompted to confirm the reboot operation. The user must shutdown the segment routing context and delete the prefix-sid-range command in all IGP instances to change the SRGB. Cfg-Fail Script. logout — Enables the user to execute the logout command. The first key of a list is unnamed in the MD-CLI, however, there are exceptions where the key is named and must be entered. 7750 SR: Values sap-id null port-id The command syntax This command configures the maximum number of ports allowed in the LAG. Refer to OSPF Commands for CLI commands and syntax. decayed — Displays damping entries that are decayed but are not suppressed. It describes the CLI structure and hierarchy, with major command groups like configuration and show commands at the root level. For example: VPRN interface ATM SAP parameters on a 7750 SR can only be configured on ATM-type MDAs and ATM-configured ports. py to display all VPRN interfaces and the in/out packets in one output. These commands are documented in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide and 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Command Reference Guide. The command syntax is shown in the command description, where the command is displayed in bold, followed by any key names and a type. This command displays statistics for DHCP relay and DHCP snooping. The parameter types include (but are not limited to): To display debugging output, configure a log using the from debug-trace command and then view the output of the log. Audience This manual is intended for network administrators who are responsible for configuring the 7750 SR-Series routers. For example, assume the config-backup count is set to 5 and the configuration file is called xyz. #5. Oct 31, 2023 · One example of an application is a custom CLI command. At the highest level is the ROOT level. 4. The command description indicates the required syntax for each command. This command configures a text message to be included in the log event that is sent when the system generates an alarm. Classic CLI Command Reference Guide This guide describes all classic CLI commands (except for the clear, monitor, show, and tools commands) and their supported values and parameters. 10. These commands are documented in the 7450 ESS, 7750 SR, 7950 XRS, and VSR CLI Command Reference Guide and 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI Command Reference Guide. 1. 168. Note: This guide generically covers Release 3HE 18412 000 x TQZZA , for information about the supported features and applicable platforms in each load of the 7450 ethernet service switch 7750 service router 7950 extensible routing system virtualized service router md-cli user guide release 21. The command can only be executed from within the configuration context. Table 4: CLI Environment Commands Command Description Page Mar 15, 2024 · All other applicable commands supported on the nodes are described in the 7450 ESS, 7750 SR, 7950 XRS, and VSR Classic CLI Command Reference Guide and the 7450 ESS, 7750 SR, 7950 XRS, and VSR Clear, Monitor, Show, and Tools CLI Command Reference Guide. 2. Use the following CLI syntax to reboot: admin# reboot [active | standby | upgrade] [hold] [now] The pwc command provides a user who is in the process of dynamically configuring a chassis a way to display the current or previous working context of the CLI session. Note: This command should only be used with authorized direction from the Nokia Technical Assistance Center (TAC). System management can then only be performed using the command line interface (CLI). We can access to the CLI of an Nokia 7750 SR and Nokia 7450 ESS with three way. If no IP address or interface name is specified, then all configured interfaces are displayed. 1. MPLS Guide See the 7450 ESS, 7750 SR, and 7950 XRS MD-CLI Command Reference Guide for information about the admin commands in the MD-CLI. R1 Platforms. An IP address range can be reserved for exclusive use for services by defining the config>router>service-prefix command. See the 7450 ESS, 7750 SR, and 7950 XRS MD-CLI Command Reference Guide for information about the admin commands in the MD-CLI. Jul 12, 2024 · Documents under this category include information about the attributes, APIs, and the full set of CLI commands (MD-CLI and classic) supported by SR OS. Reception of any PDU from the cache server resets the hold timer. cfg is saved with a . See "Loading configuration interactively" in the 7450 ESS, 7750 SR, 7950 XRS, and VSR MD-CLI User Guide for more information. If the LAG name is a numeric identifier in the range of 65 to 800, this command must be configured to 32. Newly created or modified command aliases apply to new sessions and do not affect the current session. The state of the present working directory is maintained for the CLI session. The MD-CLI is a management interface that can be used to manage Nokia SR OS routers. The TiMOS logger utility then distributes the notification of this event to its configured log destinations which may be CONSOLE, telnet session , memory log, cflash file, syslog, or SNMP trap destinations logs. Synopsis: Text message sent in the log event when input changes Context: configure system alarm-contact-input number trigger-message string: Tree: trigger-message Description. The following example displays the command usage for a PIM join policy named “pim_join”. NISH Installation and User Guide This guide describes the Nokia Network Interface Shell (NISH) system architecture, functional overview, features, and how to install and set up the NISH. ujbbtpas lnrywm fnlv gtstk wwnnl jtnn tfo sgm myrmm tzac
- TOP ENTRY
- PICK UP
- CONTACT